In what felt like a one-two punch, I recently had a Seagate 3 TB internal drive fail, then the manufacturer’s “SeaTools” diagnostic software wouldn’t boot. I used the Windows XP version of SeaTools, and the software then recommended using the DOS version. Further complicating the diagnostics, to use the software you have to burn a “disk image” of the software on a CD or floppy disk. I opted for the CD, not so surprisingly, and used “Alex Feinman’s ISO Recorder.” That Freeware is recommended on the Seagate website, if you don’t have programs like Nero, EasyCD Creator, etc., but it didn’t work for me.

Upon reading carefully through the instructions and creating the ISO disk, I rebooted the computer and it froze on a message reading “Error reading from drive A: DOS area…. Ignore (I) Retry (R) Abort (A).” Hitting “I” did nothing, so I then moved on to try all kinds of fixes to get past that. Turning off the “A” drive in the BIOS settings didn’t solve the problem, and changing the boot sequence order, -making the CD/DVD drive the priority – didn’t help either.

What DID work was using a different program to burn the disk image. I fired up my Mac, downloaded the DOS ISO image, and burned it to a new CD using the Disk Utility program. To do that, you open up Disk Utility, click “File” at the top, select “Open Disk Image,” and navigate to and open the Seagate “SeaToolsDOS223ALL.ISO” file you have downloaded.

Then, still in Disk Utility, select the ISO filename that shows up in the bar on the left side of the utility. Go up and select the “Burn” icon, and the ISO disk should soon be ready.

From there, I put that disc in the Windows computer, and it booted straight to the “SeaTools for DOS” software. The Long Test is the way to go, as it discovered a whole page’s worth of bad sectors on the drive. Based on the test results, the problems are apparently fixed, though that still needs to be independently verified.

If you have any questions about this process, feel free to let me know in the comment section below. Additionally, if you have benefited from this post, leave a little note or consider sharing this page. Thanks!


Mac vs. PC


The Mac vs. PC debate is much like beating a dead horse… a VERY dead horse. There will NEVER be any glimmering examples that prove either system tops the other, so it’s both funny and irritating to read the comments on the article “How to know if your Mac is infected with the Flashback virus (and how to fix it),” which can be read here:

Look, I grew up using Windows systems at home and, thinking back, I spent a lot of time in a lot of weird places. One such place was my buddy, Brady’s, grandma’s basement. I don’t remember how we ended up hanging out there, but what I do recall is starting up the record player and booting up her Windows NT computer. Oddly, at the time it really didn’t feel odd at all. Even before computers were the norm, they felt like the norm, and some of us just naturally gravitated toward them.

Anyway, I spent A LOT of time on Windows systems, growing up. But I started using Macs more and more as time progressed. In middle school, my friends and I obediently took turns playing “Oregon Trail” on “free days” in our Ohio History class. That was seventh grade. In eighth grade, we learned proper typing skills on old Macintosh Classic IIs, which had only black and white screens. Then, in high school, the “bondi blue,” “tangerine,” and “ruby” iMac G3s became all the rage, when our high school installed them.

Fast-forward a decade later, and I own both a Windows computer and an Apple computer. They both serve a purpose but, when it comes to processor-intense applications, I have no choice but to use the Apple system. The same logic is in place in the office. We have one Windows system that’s dedicated to data transfer. All of our video editing, though, takes place on Macs… most editors prefer them… so do audio engineers… and graphic designers… not all, but most, and there is a key reason: stability.

Windows enthusiasts sometimes rave about how they can build a system that is just as good, at a fraction of the cost. Well, “just as good” is a rather subjective observation, unless they are perform actual bench tests.

Although many people like Apple computers for their ease-of-use, I have found Windows operating systems to be super customizable. People can spec them out and, for those that have such an interest, games made for Windows are quite abundant. On the other hand, they historically start to become less and less reliable as they get bogged down with heavy processing. I can’t have that with some of the work I do.

I originally bought my Mac to transfer video footage for a TV show. It was flawless in that capacity and has served me well with audio editing. Freeware and expandability gives Windows an upper-hand in those categories, however. So basically, with all this said, each operating system has its uses… its pros and cons. So, if you haven’t done so already, check out and compare both. It could open up a whole new world…

Ancient Computers


In conversation yesterday, the topic of growing up around computers came about. I have always had what seems to be a knack for technology, to such a degree that, out of high school, I would occasionally make house calls to set up printers, home entertainment systems, and computers. But I think rather than simply attributing it to a “knack,” part of it certainly stems from getting a head start on technology.

Before everyone had computers at home, my dad was in a computer club, and we were, no doubt, among the first people in our city to have a P.C. Our first family computer was a Commodore 64 that was purchased in the mid-80s. When friends would come over, in addition to Nintendo, we also had a slew of computer games that we could play, which were all stored on 5″ floppy disks. Upon typing a long character string on the computer and executing the “run” code, the floppy drive would whirr for what seemed to be five minutes. If the game was big enough, you would have to flip the disk over so the computer could continue loading it. “California Games,” “Test Drive,” “Skate or Die” – we had everything we needed to keep us entertained stored away in a couple huge, plastic floppy disk organizers.

The next step up from there felt like a giant one, getting a hand-me-down 486 computer…with a space-saving 3″ floppy disk drive! The computer was DOS based, so I had to learn a new set of codes to browse through the directory. Most people don’t realize it, but that same fundamental architecture is still there on computers today – on a Windows system it’s the “Command Prompt” in the Start Menu that most users might occasionally skim past and have no idea what it is. Opening that bad boy up is like climbing down into the sewer and seeing all these crazy systems you never think about that keep life moving smoothly up on the surface.

That Command Prompt, with the blinking cursor, on the 486 and prior machines WAS the only Graphical User Interface. There was no double-clicking because there was no mouse, and those machines could barely display a picture…. of anything! In fact, seeing an actual digitized image was rare at that time and, it seems like those rare pictures you would see, were always of women in bikinis…or less. The more things change, the more they stay the same. Ha!

For us, there was no “world wide web.” All we had was this intranet underworld called the BBS, or Bulletin Board System. It was like a localized internet. Sitting at your computer, you would dial up, via modem, the BBS’s phone number and connect to the SysOp’s (System Operator) computer. I never met a SysOp in person, but these guys (and gals) had to have been huge nerds. Almost all BBSs were free, so they were paying for host computers, phone line(s), and electric bills out of pocket. That’s dedication! “The Hole” was the most popular BBS around, as it had three phone lines, so you could chat(!) with other users who were concurrently logged in to either of The Hole’s two other phone lines. A BBS would also allow users to write messages – today’s equivalent of an email – play games, participate in message boards and polls, and download free software and other files.

At this point, the tech revolution was starting to pick up, and my friends were climbing out of “The Hole” in droves, with AOL being the good shepherd. Good ol’ AOL. The interface was brilliant, and their chat rooms were legendary. Remember when proponents of the Internet would tout all the good this interconnectedness would bring – “meet people from different cultures….from all across the globe”? Well that’s how it used to be, before social networking came along. We eventually stopped sending messages to Melisizwe in Uganda and started sending messages to Bob from the office party.

Another technological high point was getting my first laptop. It was a Compaq something-or-other that was a Sears clearance item. The clearance case in the store was pretty low-key… probably too low-key. That all makes sense now because I distinctly remember having a conversation in 2003 or so about how how it seemed like Alan Lacy was trying to destroy Sears… seems like he is finally getting his way. Anyhow, back to the story: so I kept watch as the price of the clearance laptop slowly got marked down from $900 to $600 to $300. Although I was stoked when I finally bought it, the damn thing must’ve been built from spare parts from the Apollo program. Once the computer was on for a while, something would kick in and start to peg the CPU. The fan would slowly whir louder and louder, the computer would slowly get warmer, and finally the whole system would just shut off.

Finally fed up enough with the whole Windows shebang, and getting more and more into audio production, a Powerbook came next. A used, dented up Powerbook at that. The first owner (I was the third) turned out to be a very minor celebrity who didn’t clean out the contents of the hard drive so well before getting rid of the computer. It was funny seeing her self portraits, including a jaw-dropping one that could have put any “before and after” speculation to rest. Making that kind of discovery can feel like holding a grenade… and sometimes you just have to takes steps to protect people who aren’t smart enough to protect themselves.

And now here we are. My Macbook Pro is the coolest, fastest computing device I have ever owned. And just as it’s been writing about the evolution of my own personal techno-world, I will one day look back and think about my fond memories for my latest, greatest computer and just laugh.

Spending the day troubleshooting…. I recently upgraded my primary audio software from Pro Tools 8 to PT 10. Unfortunately, I have long been stuck in this cycle of writing, editing, and mixing music on an archaic setup, which is centered around an old Dell XPS computer running Windows XP. Growing up using both Windows AND Apple computers, I can tell ya that they both work great for simple tasks… but once you get down to business, Windows systems are completely inefficient while Macs take the gold medal.

With Pro Tools, a lot of things are happening at once. You have things moving and scrolling in the mix and edit windows, plugins are doing some processing, and information is being consolidated and sent to the sound and video cards. Windows XP has just never been able to handle those tasks well while running Pro Tools 8. The output emitting from the speakers randomly becomes completely distorted and is only solved by either 1)stopping and restarting the playback 5, 6, 7 times, sometimes more or 2)getting into my settings and changing how much information the computer buffers before it’s translated into an audible signal.

Being a little behind the times here computer-wise, Pro Tools 10 isn’t supported on my old XP system, so I just have it installed on a Macbook Pro… well, the MBP doesn’t have two, big fancy displays to show what’s going on in both the edit and mix windows, so I keep going back to Pro Tools 8 to work with. Well, today I just had enough, as I kept running into that distorted signal roadblock over and over and over again, while mixing a song called “Don’t Look Down.”

I moved the project over the Mac, and the process of setting up an audio interface just isn’t as easy as it seemed it would be. If there is a weakness I have when it comes to all this techno-nerd audio world stuff, it’s dealing with signal routing, bussing, and optimizing auxiliary channels. Mixing boards are complex creatures, and I impressed many-a concert goer when I was standing behind a 40 channel sound board, fresh out of high school nearly about a decade ago. It kind of looks like the cockpit of the space shuttle, but you learn… and then technology changes.

What really trips me up is digital routing. I never had to deal with MIDI addressing, syncing a dozen synthesizers to do different tasks all at once. Only once did I program a light show via DMX addressing, and I just typed in the codes the lighting director relayed to me. And only a handful of times have I had to route a digital audio console. I have a feeling more of that will be coming soon, though, as some plans are in the works.

But as for now, it’s time to play around with PT 10 a little more. I will update if I make any breakthroughs.