I get about six weeks off work every year (unpaid), so projects around the home/apartment are a great way to keep from going a little stir crazy. This time, one of the projects was to build a king size headboard from scratch.

There are more headboard styles than I ever realized and, upon settling on the elegant, yet fairly simple “Cleveland” style, it didn’t take long to realize that making angular wood cuts isn’t very conducive to the limitations a small apartment and lack of a true workspace brings. Thus, we decided to keep it simple – very simple – and left the plywood mounting board rectangular, which is the way we had Lowes cut it.

Image

There are some shops in L.A. that specialize in foam, but the reviews on Yelp made them all seem more pricey than they need to be. As an alternative, we bought two queen size mattress toppers, which can be easily cut up and pieced together as a backing on the mounting board. The other materials – the fabric, batting, and trim nails – all came from a fabric store. Also needed were a staple gun, wood screws, and spray adhesive. The “E6000” adhesive worked only well enough to get the job done.

Image

To start the labor, we mounted the 2×4 supports to the back of the plywood sheet. One support was attached to the left edge, one to the right edge, and one across the top to keep the plywood from bowing.

The next step was to attach the foam to the board. We found the best way was to roll up the foam and, as you slowly unroll it on the board, spray the adhesive on both the wood and the foam. As previously mentioned, the E6000 spray wasn’t so great, but the foam did stick after letting it sit for a while.

From there, the second layer of foam was cut to size, then held in place while the headboard was flipped over on top of the batting. The batting was then pulled tight and stapled to the 2x4s (and plywood at the bottom).

Image

We then stood the headboard up to make sure there were no major wrinkles evident and that the foam was looking pretty even. Things were looking good, so the headboard was again laid face down in preparation for attaching the outer layer of fabric. We went ahead and stapled the top of the fabric to the top 2×4, following a point on the pattern across to make sure the fabric would appear straight on the visible side.

Image

The, the headboard was again stood up in order to double-check that the fabric looked straight. It did, so we proceeded to pull the bottom of the fabric tight, which was then stapled on the back to the plywood. Once that looked good, we pulled the sides tight and stapled those, too.

Image

What I was expecting to turn into a headache – mounting the headboard to the bed frame – turned out just fine. One mount on the bed frame appears bent, so I was wondering if I could straighten it out, if the wood legs of the headboard would need wheels, etc. It turns out, however, that the headboard is solid enough to stand against the wall, especially since the top of the bed supports the bottom of the headboard.

Headboard DIY

Advertisements

Having worked on a number of reality TV shows, it was always part of my job to have people who MAY appear on screen sign “Consent to Use Image” forms. On one particular show, it was a rather tricky operation because there was a form for unpaid appearances, one for paid appearances, and two others for, uhhh, some sort of confusing, paid/unpaid stipulation. Ultimately, law can be a pretty murky area, so one photography professional I know always carries around $1 bills to compensate people for incidental appearances. If people happen to show up in video he shoots for commercial use, he gets them to sign the “Image Use” agreement and pays them a buck. His agreement form points out that they were paid – and how much – to further help avoid legal claims.

Another important consideration for these “Image Use” forms is to jot down on the form itself a physical description of the people who have signed these agreements. In the long run, Producers and Video Editors can then determine much easier which people have already been cleared to be used in your production.

The example listed below comes from a show I previously worked on. As I am in no place to dispense legal advice, I am conveying the information below “as is.” In other words, using the information given is at your own discretion, and you should run it by a lawyer to see if he/she has anything to add to it.

 

Consent to Use Image

I was/will be filmed, photographed, or recorded by ____(your company name goes here)____. In consideration of the potential exposure that this production may bring me, I ____(subject fills in name here)____ grant to ____(your company name here)____ and its agents, licensees, productions vendors, affiliates, subsidiaries, successors and assigns, the universe-wide, royalty-free, fully paid-up, irrevocable, and perpetual right and permission to (without my approval) use, publish, broadcast, and copyright (whether in digital form or otherwise) my name, nickname, persona, character or characterization, initials, logo, slogan or catch phrase, autograph, facsimile signature, voice, photograph, film, video or new media portrayal, actual, simulated or drawn likeness, images, biographical or historical information, any material provided by or statement made (whether oral or written) by me, and physical attributes including, but not limited to, any material based on or derived based on my likeness.

I also agree to assume all responsibility for and hereby release and hold ____(your company name here)____ and each of its officers, directors, employees, shareholders, agents, licensees, affiliates and subsidiaries, harmless form any liability of any kind or any claim whatsoever (including, but not limited to, claims for personal injury or death, invasion of privacy, defamation, right of publicity or infliction of emotional distress) directly or indirectly arising out of or resulting in any way from my likeness being used by ____(your company name here)____ and I acknowledge that my likeness may be used in and in connection with still imagery, film and audio, affiliated with current and future ____(your company name here)____ projects.

I acknowledge that there will be no compensation to me for being filmed, photographed, or recorded and the rights granted herein except as provided herein and that ____(your company name here)____ is not required to use my likeness. I also acknowledge that all materials produced under this agreement, including any photos, films, or recordings are the absolute and exclusive property of ____(your company name here)____ forever. This agreement shall be governed by and construed under the laws of the State of ____(your U.S. state)____ and the parties hereby consent to the exclusive jurisdiction and venue in the courts sitting in ____(your city and state)____.

AT THE TIME THAT I SIGN THIS AGREEMENT, I AGREE THAT I AM EIGHTEEN (18) YEARS OF AGE OR OLDER.

PARTICIPANT

Print name:________________________

Signature:_________________________

Date of birth:_____________________

Today’s date:______________________

 

Once I get my domain website in order, I plan on making the document above a downloadable form that’s already formatted, so stay tuned. For more Reality TV / Documentary resources, check out this post: How to Conduct a Documentary / Reality TV Interview.

 

Finally, as an aside, WordPress provides me with two types of useful stats: page views and how a person landed here. Though anonymous, sometimes I can see search engine terms that linked to this page. For this entry, I sometimes see terms like “can you be on reality tv without consent?”

Well… unless you feel your appearance is exploitative and tarnishes your reputation, don’t be a jerk and try to figure out ways to screw people out of money. There is already too much dumb litigation going on in this society, bogging down the courts and creating animosity between people.

I’m no lawyer or judge, but I have taken Media Law classes that exposed me to real-world privacy cases. Chances are, if you’re trying to figure out if you can exploit people and seek damages for a situation where no harm was done to you, then you’re probably S.O.L. Were you in a public space when you were filmed? If so, you can’t have any expectation of privacy. Were you on film because you were in the proximity of a public figure? Then, you’re not the subject of the video. If you just happened to be in the background, you may – but probably don’t – have a case. Were you on the news? News is public interest. No money for you. If you were in a private space, are you sure there wasn’t a filming notice posted and, by entering the property, you were giving consent for your likeness to be used?

If you were in the background of a show, do what I’ve done – laugh about it, share the exposure with your friends, and fuhgetaboutit. Unless Honey Boo Boo’s family made you look bad (by association), you were caught making out with a high schooler, or Snooki assaulted you, it’s probably not that serious. If it is, get off the internet and take the footage you were in to a lawyer, because you’re not going to get good, free legal advice through a Google search.

As always, feel free to share this page via the social networking links provided below… comments are always cool, too!

Wine is a tricky thing. The output between two years is never quite alike because no two growing and harvesting cycles are quite the same. Some days see rain, others not. Some days are stifling and others are perfect. It’s just always different, day to day, year to year. That’s part of what makes it fun – the unknown… and the hunt for a product cultivated under “optimal” conditions (whatever that is). But the wine hobby can also be a frustrating one. That part comes from finding a go-to favorite and realizing how elusive it becomes once new stock is released and the stores stop carrying your favorite year.

My interest in wine tasting really stems from a singular event. It was Thanksgiving in 2007 or so, and the holidays are always a time when my family keeps the wine flowing. One bottle in the mix was a 2005 Turning Leaf Pinot Noir, and it stood out like a sore thumb… but a good sore thumb… a really good sore thumb! That bottle of Pinot Noir was a cheap, $6-7 bottle (in Ohio), and it really made me say, for the first time, “Woah, this is really good!” Years after first trying it, it’s taste is still pretty distinct in my mind – it had strong strawberry notes and a buttery kind of feel/flavor. And now I can’t find it anywhere. By the way, Christmas is coming up in a couple months, in case your sleuth skills are better than mine. Just sayin’.

Back to the real focus of this post… It’s really interesting considering how broad the wine “bouquet” can be. Not only do growing conditions affect the flavor, so do the storage methods. Stainless steel often gives wines a more crisp taste, which can be complementary for light, fruity wines. On the other hand, red wines stored in oak sometimes enhance wines with lovely vanilla notes.

The list below is of notes I have either used or heard others use to describe wine characteristics:

anise
apple
asparagus (as a joke, from the movie “Sideways”)
banana
berry
blackberry
blueberry
butter
butterscotch
cat piss (seriously, I’ve heard this one!)
cedar
cherry
chocolate
coffee
cola
copper
floral
fruit punch
grapefruit
grass (freshly cut, of course)
hay
honey suckle
iron
jam
lemon zest
licorice
melon
metal
minerals
nails
oak
orange blossom
orange zest
peach
pear
pepper
pineapple
plum
raisin
raspberry
rose
smoke
steel
straw
strawberry
tannin
toast
tobacco
vanilla
watermelon
zoo (the first Gewürztraminer I ever had tasted like the smell of a zoo… yuck!)

As for an actual wine wheel, feel free to print/check this one out:

Wine wheel courtesy of:
Public Domain Pictures